hootua.com

Shaking and Moving

This guide covers the most common causes for this symptom and the parts most likely to fix it — verified across multiple representative models before publishing.

Quick Answer Shaking and moving in a washer dryer combo is often caused by worn drum or tub springs, loose or broken hardware, or issues with the motor or fan components. These parts help keep the machine stable during operation, and when they fail, the unit may vibrate excessively or shift position.
Model Specific Part Lookup

Find Exact Compatible Parts For Your Machine

Because this diagnostic guide is general, enter your exact appliance model number to load matching parts.

Diagnostic Details

A washer dryer combo that shakes or moves while running is frequently linked to problems with key components that keep the machine balanced. Here are the most common causes, ranked by likelihood:

  1. Drum or tub issues (e.g., worn springs): The drum or tub relies on springs or supports to stay in place during cycles. Over time, these springs can weaken, break, or detach, causing the drum to shift and the entire unit to shake or move. This is one of the most frequently associated causes of this symptom.
  2. Loose or broken hardware: Bolts, brackets, or other hardware that secure the drum, tub, or motor may loosen or fail. When these parts are compromised, the machine loses stability, leading to excessive vibration or movement. This is also a very common issue.
  3. Motor or fan problems (e.g., damper pad wear): The motor and fan components help balance the machine during operation. If parts like the damper pad wear out or the motor mounts become damaged, the unit may vibrate unevenly or shift. While less common than drum or hardware issues, this can still cause shaking or movement.

Replacing these parts typically costs between $6–$220, depending on the specific component needed.

Parts That Commonly Fix This

Based on cross-model data for this symptom — compare prices before you buy

Drum Or Tub

Washer Tub Spring

WPW10250667
Drum Or Tub

Tub Wear Pads - Package of 3

285744
Other Hardware

Replacement Part

12112425
Other Hardware

Suspension Spring

WP63907
Motor Or Fan

Damper Pad Kit

203956

Repair Difficulty

Advanced (professional recommended)

Safety Note

Unplug the appliance before removing panels to access the drum or tub. Unplug the appliance before attempting any repair, as a general precaution. Unplug the appliance before accessing the motor — moving parts can retain momentum after power is cut.

Typical Cost Range

$6–$220 for the part, before labor if you hire a technician.

Frequently Asked Questions

Can I temporarily stop the shaking while I wait for a repair?
Yes, you can try moving the machine slightly away from the wall or adjusting its feet to level the unit. However, this is only a temporary fix—you’ll still need to replace the faulty part to prevent further damage or safety hazards.
Will shaking damage other parts of the washer dryer combo if I ignore it?
Yes, prolonged shaking can loosen additional hardware, strain the motor, or even cause the unit to detach from its connections. Addressing the issue promptly will help avoid more expensive repairs down the line.