hootua.com

Spinning Issues

This guide covers the most common causes for this symptom and the parts most likely to fix it — verified across multiple representative models before publishing.

Quick Answer Spinning issues in your washer dryer combo are often caused by worn or loose hardware, a failing motor or fan, or problems with the drum or tub. These parts frequently wear out over time and can disrupt the spinning cycle.
Model Specific Part Lookup

Find Exact Compatible Parts For Your Machine

Because this diagnostic guide is general, enter your exact appliance model number to load matching parts.

Diagnostic Details

If your washer dryer combo is having trouble spinning, the issue is often linked to one of the following parts:

  1. Other hardware (e.g., Replacement Part): Loose, broken, or worn hardware can prevent the drum from spinning smoothly. This is one of the most common causes of spinning problems, as these small components can fail without obvious signs.
  2. Motor or fan (e.g., HOUSING ASSEMBLY, CLUTCH COUPLING): A failing motor or fan assembly may struggle to provide enough power for spinning. Over time, wear or electrical issues in these parts can lead to erratic or incomplete spinning cycles.
  3. Drum or tub (e.g., Rear Tub Gasket): Damage to the drum or tub, such as cracks, misalignment, or a worn gasket, can interfere with the spinning mechanism. This is a commonly reported issue, especially if the drum wobbles or doesn’t rotate at all.
  4. Screw or fastener (e.g., Washer Clutch Assembly): Loose or stripped screws or fasteners can cause the drum to spin unevenly or stop altogether. These small but critical components often go unnoticed until they fail.

Replacement parts for these issues typically range in price from $6 to $288, depending on the specific component needed.

Parts That Commonly Fix This

Based on cross-model data for this symptom — compare prices before you buy

Other Hardware

Replacement Part

12112425
Other Hardware

Replacement Part

285753A
Motor Or Fan

HOUSING ASSEMBLY,CLUTCH COUPLING

AEN73651402
Motor Or Fan

Damper Pad Kit

203956
Drum Or Tub

Rear Tub Gasket

4036ER2004A
Drum Or Tub

Agitator Directional Cogs

80040
Screw Or Fastener

Washer Clutch Assembly

285785

Repair Difficulty

Moderate

Safety Note

Unplug the appliance before attempting any repair, as a general precaution. Unplug the appliance before accessing the motor — moving parts can retain momentum after power is cut. Unplug the appliance before removing panels to access the drum or tub.

Typical Cost Range

$6–$288 for the part, before labor if you hire a technician.

Frequently Asked Questions

Can a loose screw really stop the washer dryer combo from spinning?
Yes, even a single loose screw or fastener can prevent the drum from spinning properly. These small parts hold critical components in place, and if one fails, it can disrupt the entire spinning mechanism.
How do I know if the motor is the problem?
If the washer dryer combo makes unusual noises, like grinding or humming, or if the drum spins slowly or not at all, the motor or fan assembly is often the culprit. These parts wear out over time and may need replacement.